Accurate Rotavirus Detection with Our Rota Virus Test Kit
In the realm of biotechnology and disease prevention, QL Biotech stands at the forefront, offering innovative solutions that empower healthcare professionals and individuals alike. We are proud to introduce our latest advancement in infectious disease diagnostics: the Rotavirus Rapid Test Device, specifically tailored for fecal samples. This product represents a significant leap forward in the rapid, accurate detection of rotavirus, a leading cause of severe diarrhea among infants and young children globally.
Each device contains a strip with colored conjugates and reactive reagents pre-spreaded at the corresponding regions.
Specimens dilution tube with
buffer
0.1 M Phosphate buffered saline (PBS) and preservative
Disposable pipettes
For watery specimens collection use.
Package insert
For operation instruction.
NOTE:
The intensity of the color in test region (T) may vary depending on the concentration of aimed substances present in the specimen. Therefore, any shade of color in the test region should be considered positive. Besides, the substances level can not be determined by this qualitative test.
Insufficient specimen volume, incorrect operation procedure, or performing expired tests are the most likely reasons for control band failure.
Rotavirus infections can spread rapidly without timely intervention, making swift diagnosis essential for effective management and treatment. Our Rotavirus Rapid Test Device has been meticulously designed to address this critical need, employing a sophisticated visual interpretation mechanism that ensures results are both quick and reliable. At the core of this state-of-the-art device is a unique internal strip that undergoes a color change, signaling the presence of rotavirus antigens in the sample. This direct, visual confirmation method eliminates ambiguity and provides healthcare practitioners with the confidence to make informed decisions regarding treatment and care. At QL Biotech, we understand the importance of accuracy and ease of use in diagnostic testing. That's why our Rotavirus Rapid Test Device is engineered to be user-friendly, requiring only a minimal sample to function effectively. Within minutes, the device offers clear results, facilitating a rapid response to rotavirus infections. This not only enhances patient outcomes but also contributes to the overall control and reduction of rotavirus transmission in communities. By choosing QL Biotech’s Rotavirus Rapid Test Device for your diagnostic needs, you're not just selecting a product; you're investing in peace of mind, knowing that you're equipped with a tool designed for excellence in rotavirus detection.
PRINCIPLE
It has been designed to detect rotavirus through visual interpretation of color development in the internal strip. The membrane was immobilized with antirotavirus antibodies on the test region. During the test, the specimen is allowed to react with colored anti-rotavirus antibodies colloidal gold conjugates, which were precoated on the sample pad of the test.
The mixture then moves on the membrane by a capillary action, and interact with reagents on the membrane. If there were enough rotavirus in specimens, a colored band will form at the T region of the membrane.
Product Detail
-
Brand: QL
Specimens: : Feces
Reading time：10 minutes.
Pack：20 T
STORAGE: 2‐30°C
KIT COMPONENTS(Device)
- Individually packed test devices
- Specimens dilution tube with buffer
- Disposable pipettes
- Package insert
PROCEDURE
- Bring tests, specimens, buffer and/or controls to room temperature (15-30°C) before use.
1. Specimen collection and pre-treatment:
1) Use the specimen collection container for specimen collection. Best results will be obtained if the assay is performed within 6 hours after collection.
2) For solid specimens: Unscrew and remove the dilution tube applicator. Be careful not to spill or spatter solution from the tube. Collect specimens by inserting the applicator stick into at least 3 different sites of the feces to collect approximately 50 mg of feces (equivalent to 1/4 of a pea).
For liquid specimens: Hold the pipette vertically, aspirate fecal specimens, and then transfer 2 drops (approximately 50 µL) into the specimen collection tube containing the extraction buffer.
3) Place the applicator back into the tube and screw the cap tightly. Be careful not to break the tip of the dilution tube.
4) Shake the specimen collection tube vigorously to mix the specimen and the extraction buffer. Specimens prepared in the specimen collection tube may be stored for 6 months at -20°C if not tested within 1 hour after preparation.
2. Testing
1) Remove the test from its sealed pouch, and place it on a clean, level surface. Label the test with patient or control identification. To obtain a best result, the assay should be performed within one hour.
2) Using a piece of tissue paper, break the tip of the dilution tube. Hold the tube vertically and dispense 3 drops of solution into the specimen well (S) of the test device.
Avoid trapping air bubbles in the specimen well (S), and do not drop any solution in observation window.
As the test begins to work, you will see color move across the membrane.
3. Wait for the colored band to appear. The result should be read at 10 minutes. Do not interpret the result after 20 minutes.
Note: If the specimen does not migrate (presence of particles), centrifuge the extracted specimens contained in the extraction buffer vial. Collect 80 µL of supernatant, dispense into the specimen well (S) of a new test device and start afresh following the instructions mentioned above.
KIT COMPONENTS(Device)
Each device contains a strip with colored conjugates and reactive reagents pre-spreaded at the corresponding regions.
Specimens dilution tube with
buffer
0.1 M Phosphate buffered saline (PBS) and preservative
Disposable pipettes
For watery specimens collection use.
Package insert
For operation instruction.
NOTE:
The intensity of the color in test region (T) may vary depending on the concentration of aimed substances present in the specimen. Therefore, any shade of color in the test region should be considered positive. Besides, the substances level can not be determined by this qualitative test.
Insufficient specimen volume, incorrect operation procedure, or performing expired tests are the most likely reasons for control band failure.
Rotavirus infections can spread rapidly without timely intervention, making swift diagnosis essential for effective management and treatment. Our Rotavirus Rapid Test Device has been meticulously designed to address this critical need, employing a sophisticated visual interpretation mechanism that ensures results are both quick and reliable. At the core of this state-of-the-art device is a unique internal strip that undergoes a color change, signaling the presence of rotavirus antigens in the sample. This direct, visual confirmation method eliminates ambiguity and provides healthcare practitioners with the confidence to make informed decisions regarding treatment and care. At QL Biotech, we understand the importance of accuracy and ease of use in diagnostic testing. That's why our Rotavirus Rapid Test Device is engineered to be user-friendly, requiring only a minimal sample to function effectively. Within minutes, the device offers clear results, facilitating a rapid response to rotavirus infections. This not only enhances patient outcomes but also contributes to the overall control and reduction of rotavirus transmission in communities. By choosing QL Biotech’s Rotavirus Rapid Test Device for your diagnostic needs, you're not just selecting a product; you're investing in peace of mind, knowing that you're equipped with a tool designed for excellence in rotavirus detection.