Reliable Syphilis Test Blood Kit - Quick Detection
PRINCIPLE
The S. typhoid/S. Para typhi Ag Rapid Test Device (Feces) is a lateral flow chromatographic immunoassay. The test cassette consists of: 1) a burgundy colored conjugate pad containing S.typhoid/S. Para typhi antibody conjugated with colloid gold, 2) a nitrocellulose membrane strip containing two test bands (S. typhoid/S. Para typhi bands) and a control band (C band). The S. typhoid band is pre-coated with monoclonal anti- S. typhoid for the detection of S. typhoid Ag, S. Para typhi band is pre-coated with reagents for the detection of S. Para typhi Ag , and the C band is pre-coated with goat anti mouse IgG.
When an adequate volume of test specimen is dispensed into the sample well of the cassette, the test specimen migrates by capillary action across the test cassette. S. typhoid Ag if present in the patient specimen will bind to the S. typhoid Ab conjugates. The immunocomplex is then captured on the membrane by the pre-coated S. typhoid antibody, forming a burgundy colored S. typhoid band, indicating a S. typhoid positive test result.
S.Para typhi Ag if present in the patient specimen will bind to the S. Para typhi Ab conjugates. The immunocomplex is then captured by the pre-coated S. Para typhi Ab on the membrane, forming a burgundy colored S. Para typhi Ab band, indicating a S. Para typhi Ab positive test result. Absence of any test bands suggests a negative result. The test contains an internal control (C band) which should exhibit a burgundy colored band of the immunocomplex of goat anti Mouse IgG/Mouse IgG-gold conjugate regardless of the color development on any of the test bands.
Otherwise, the test result is invalid and the specimen must be retested with another device.
Product Detail
-
-
-
-
-
-
-
-
Brand: QL
Specimens: : Feces
Reading time：10 minutes.
Pack：20T
STORAGE: 2‐30°C
KIT COMPONENTS(Device)
- Test devices
- Droppers
- Single Buffer
- Package insert
-
-
-
-
-
-
-
-
ASSAY PROCEDURE
-
（Typhoid Ag&S. typhoid/S. Para typhi Ag）
Bring tests, specimens, buffer and/or controls to room temperature (15-30°C) before use.
1. Specimen collection and pre-treatment:
1) Unscrew and remove the dilution tube applicator. Be careful not to spill or spatter solution from the tube. Collect specimens by inserting the applicator stick into at least 3 different sites of the feces.
2) Place the applicator back into the tube and screw the cap tightly. Be careful not to break the tip of the dilution tube.
3) Shake the specimen collection tube vigorously to mix the specimen and the extraction buffer. Specimens prepared in the specimen collection tube may be stored for 6 months at -20°C if not tested within 1 hour after preparation.
2. Testing
1) Remove the test from its sealed pouch, and place it on a clean, level surface. Label the test with patient or control identification. To obtain a best result, the assay should be performed within one hour.
2) Using a piece of tissue paper, remove the tip of the dilution tube. Hold the tube vertically and dispense 3 drops of solution into the specimen well (S) of the test device.
Avoid trapping air bubbles in the specimen well (S), and do not drop any solution in observation window.
As the test begins to work, you will see color move across the membrane.
3. Wait for the colored band(s) to appear. The result should be read at 10 minutes. Do not interpret the result after 20 minutes.
INTERPRETATION OF ASSAY RESULT
-
NOTE:
-
- 1.The intensity of the color in test region (T) may vary depending on the concentration of aimed substances present in the specimen. Therefore, any shade of color in the test region should be considered positive. Besides, the substances level cannot be determined by this qualitative test.
- 2.Insufficient specimen volume, incorrect operation procedure, or performing expired tests are the most likely reasons for control band failure.
Typhoid fever, much like syphilis, presents a global health challenge, particularly in regions with limited access to clean water and healthcare. The S. typhoid/S. Para typhoid Ag Rapid Test Device offers a beacon of hope, enabling early detection and, consequently, early intervention. This rapid test kit operates on the lateral flow immunoassay principle, a proven method that provides results with remarkable speed and accuracy. Within minutes, healthcare professionals can discern the presence of typhoid antigens in a patient's blood, a process mirroring the efficiency desired in syphilis detection. The significance of rapid testing for infections like typhoid and syphilis cannot be overstated. Early detection means quicker, more effective treatment, significantly reducing the risk of complications and transmission. The S. typhoid/S. Para typhoid Ag Rapid Test Device by QL Biotech encapsulates this ethos, offering a solution that is not only swift but also user-friendly and accessible. It's designed to be operated by professionals and laypersons alike, making it a valuable addition to both clinical and remote settings. As we continue to face health challenges worldwide, QL Biotech's commitment to innovation, particularly in the realm of infectious disease detection, stands as a testament to the power of modern medical technology.