Rapid Detection of Leptospira IgG IgM with QL's Malaria Test Device
In the modern world of medical diagnostics, speed, reliability and accuracy are key. QL Biotech is proud to present the Malaria Plasmodium Falciparum Rapid Test Device - your optimal solution for quick and efficient Detection of Leptospira IgG IgM. Designed to deliver dependable results specifically for Leptospira IgG IgM detection, our device guarantees results within a short span of just 10 minutes, from just a small whole blood specimen.
As a frontrunner in the biotech sector, QL ensures quality and reliability in all our products, and our Malaria Plasmodium Falciparum Rapid Test Device is no exception. It boasts not only an impressive speed, but also an unparalleled accuracy, making it a preferred choice for medical professionals worldwide.
The test device is extremely user-friendly, requiring no complex procedures or equipment and can easily be used in any setting - from advanced lab environments to rural clinics. This accessibility, combined with the rapid detection time, ensures that critical diagnoses can be made promptly, making treatment regimens more effective. In conclusion, the QL Malaria Plasmodium Falciparum Rapid Test Device is not just a tool, but a step towards a healthier future. Its efficiency in the Detection of Leptospira IgG IgM, coupled with its remarkable speed and ease-of-use, make it an asset for any health professional seeking faster, more accurate results. Trust QL Biotech, for when speed and accuracy matter the most.
Product Detail
-
Brand:QL
Specimens: : Whole Blood
Reading time：10 minutes.
Pack：25 T
STORAGE: 2‐30°C
KIT COMPONENTS
- Test devices
- Droppers
- Buffer
- Package insert
DIRECTIONS FOR USE
- Malaria Plasmodium Falciparum (P.f.) Rapid Test Device &
Malaria P.f./P.v. Rapid Test Device
Allow the test device, specimen, buffer, and/or controls to equilibrate to room temperature (15‐30°C)
prior to testing.
1. Remove the test device from the foil pouch and use it as soon as possible. Best results will be obtained if the assay is performed within one hour.
2. Place the test device on a clean and level surface. Transfer the specimen by a pipette or a dropper: To use a Pipette: Transfer 5 L of whole blood to specimen well of the test device, and then add 3 drops of buffer (approximately 180ul) to the buffer well, and start the timer.
To use a Disposable Specimen Dropper: Hold the dropper vertically; draw the specimen up to the Fill Line (approximately 5ul). Transfer the specimen to the specimen well, then add 3
drops of buffer (approximately 180ul) to the buffer well and start the timer. Wait for the colored line(s) to appear. The result should be read at 10 minutes. Do not interpret the result after 20 minutes. - Malaria Plasmodium Falciparum (P.f.) Rapid Test Strip
Allow the test strip, specimen, buffer, and/or controls to equilibrate to room temperature
(15‐30°C) prior to testing.
1. Remove the test strip from the foil pouch and use it as soon as possible. Best results will be obtained if the assay is performed within one hour.
2. Transfer the specimen to the specimen tube by a pipette or a dropper:
To use a Pipette: Transfer 10 L of whole blood to the specimen tube, then add 3 full drops of buffer (approximately 120L).
To use a Disposable Specimen Dropper: Hold the dropper vertically, draw the specimen up to the Fill Line as shown in illustration below (approximately 10L). Transfer the specimen to the specimen tube, then add 3 full drops of buffer (approximately 120L).
3. With arrows pointing toward the specimen, immerse the test strip vertically in the specimen and start the timer. Do not pass the maximum line (MAX) on the test strip when immersing the
strip.
4. Wait for the colored line(s) to appear. The result should be read at 10 minutes. Do not interpret the result after 20 minutes. - Malaria Pf/Pan Rapid Test Device
Allow the test device, specimen, buffer, and/or controls to equilibrate to room temperature (15‐30°C) prior to testing.
1. Remove the test device from the foil pouch and use it as soon as possible. Best results will be obtained if the assay is performed within one hour.
2. Place the test device on a clean and level surface. Transfer the specimen by a pipette or a dropper:
To use a Pipette: Transfer 5 L of whole blood to specimen well of the test device, and then add 3 drops of buffer (approximately 180ul) to the buffer well, and start the timer.
To use a Disposable Specimen Dropper: Hold the dropper vertically; draw the specimen up to the Fill Line (approximately 5ul). Transfer the specimen to the specimen well, then add 3 drops of buffer (approximately 180ul) to the buffer well and start the timer.
3. Wait for the colored line(s) to appear. The result should be read at 10 minutes. Do not interpret the result after 20 minutes.
P.f.
pf /Pv
Pf/Pan
The test device is extremely user-friendly, requiring no complex procedures or equipment and can easily be used in any setting - from advanced lab environments to rural clinics. This accessibility, combined with the rapid detection time, ensures that critical diagnoses can be made promptly, making treatment regimens more effective. In conclusion, the QL Malaria Plasmodium Falciparum Rapid Test Device is not just a tool, but a step towards a healthier future. Its efficiency in the Detection of Leptospira IgG IgM, coupled with its remarkable speed and ease-of-use, make it an asset for any health professional seeking faster, more accurate results. Trust QL Biotech, for when speed and accuracy matter the most.